SEMI AUTOMATIC PELLET PRESS 20 – 40 – 60 TONS (former SODEMI)

This press enables reproducible & reliable sample preparation prior to xray analysis
Description :
This press is used to compact a powdery sample, so as to obtain a pellet with smooth and homogeneous surface to be analysed by any X-ray spectrometer.
It is equipped with a hydraulic jack and a user friendly HMI with which up to 8 recipes can be defined. For each recipe, the operator can customize the processing parameters: pressure and duration of the pressing operation.
Its configuration can be set either for free pressing (boric acid coating or in aluminium cups with outer Ø 40 mm) or for pressing in steel rings (outer Ø 40 or 51,5 mm).
The steel ring or aluminium cup (if applicable) is manually introduced into the press, so is the sample to be processed. The cover and pressure plate are put back into position and, once the desired recipe has been selected, the pressing operation is started.
After completion, the pellet is automatically extracted from the press.
Specifications :
Reference
|
“SAP” |
Principle |
Semi automatic pellet press
|
Pressing force
|
Model RD20 : 5 to 20 T (step of 1 T)
Model RD40 : 5 to 40 T (step of 1 T)
Model RD60 : 5 to 60 T (step of 1 T) |
Pressing duration
|
up to 10 min |
Press jacket inner diameter
|
40 or 51.5mm (8 to 68 mm upon request) |
Sound proof casing
|
residual noise level < 74 dBA |
Construction
|
hardened steel with tungsten carbide lining of the jacket, of the die and underneath the cover as an option
|
Power supply & consumption
|
230 V Ph-N - 400 to 480 V 3 Ph - 50 / 60 Hz |
Dimension |
Height : 1330 mm
Width : 950 mm
Depth : 710 mm
|
Weight
|
360 Kg to 380 Kg depending on the model
|
|