ENFR

Monday, 02 August 2021

Cooler Discharge Clinker Sampler PP101



EQUIPMENT DESIGNED TO COLLECT A PREDEFINED QUANTITY OF CLINKER AT COOLER OUTLET FROM UNDERNEATH THE CRUSHER

Several particle size ranges available (Standard: 2-12 mm)


Principle :

This PP101 sampler, to be positioned at the discharge of the cooler underneath the crusher (also possible at the discharge of a planetary cooler), is composed of a beam which is introduced thanks to a pneumatic jack into the flow of falling clinker. In this position, sample is collected through sampling slots located on top of the beam.

This beam is then withdrawn from the clinker flow and collected sample is evacuated to a discharge spout with the help of a metallic brush fixed at the end of a jack installed perpendicularly to the beam.

On the top of the beam, sampling slots allow the selection of the maximum particle size of the sample (12 mm as a standard); under the discharge spout a selection grid allows the elimination of the undesired portion of the sample (particle size < 2 mm as a standard) which is then transferred back to the cooler (drag chain or pan conveyor).


Specifications :
 
  • The sampler is fixed on to the existing structure by means of supports that are designed case by case
  • The inverted V shape of the upper part of the beam facilitates material flow in the sampling position
  • The beam is guided by two sets of lower and upper rollers
  • In the resting position, the front end of the sampler is flushed with the wall of the cooler and serves as a plug.
  • This sampler can either be controlled remotely in conjunction with one of our analyzers or locally through an independent control cabinet
  • Maximum length of the sampling beam : 1 800 mm
  • Jacks: driving jack =ø125 ; Discharge jack =ø 50
  • Maximum particle size: 40 mm (standard = 12 mm)
  • Eliminated portion of the sample : < 2 mm (standard) and up to < 8 mm
  • Sample volume: depends on maximum particle size (standard = 300 cm3)
  • Maximum sample temperature: 400 °C
  • Compressed air supply: 6 bars, clean & dry


Additional equipments :

  • Sampling automation
  • Sample transport
  • Sample storage
  • Preparation and analysis

 

News

September 29-30, 2021, Hotel Manaira, João Pessoa, Paraíba (Brazil) :

SEMTEC 7º Seminário Técnico da Indústria do Cimento e Cal


 

20-22 October 2021, Lille(France)
SIM Exhibition 70th, Congress of the mineral industry Society
expositionsim.com/


 
2-3 November 2021 à KhonKaen (Thailand) : 

Sugarex Thailand 2021, Sugarex Asia’s largest specialized sugar, sugarcane and bioethanol exhibition.
thaisugarexpo.com


   

 

9-12 November 2021 - Sertãozinho, SP (Brazil) :

Fenasucro & Agrocana, International Sugar Exhibition.