ENFR

Monday, 17 February 2020

Raw mix analyser FX3500



ON LINE MATERIAL ANALYSIS TO QUANTIFY Ca, Si, Fe, Al, Mg, K, P, S…

High frequency measurement to optimize raw mix composition with the automatic control of the additives weight feeders


Advantages :
 
  • Automatic on-line equipment with sample preparation, analysis, measurements report and waste ejection
  • Up to 3 sampling points can be controlled by the same analyser
  • Software available for the automatic control of the additives weight feeders
  • Improved quality with the continuous monitoring of material specifications
  • Possibility to use this equipment to control cement composition
  • Easy to install either on site or in automated laboratory


Principles :
 
  • Custom designed sampling and transport systems
  • Material is transferred into a patented high density tungsten carbide puck and ring mill
  • Ground sample is introduced into a measuring cell where it is compacted with vibrations
  • Measuring cell is loaded into a X-Ray spectrometer from Oxford Instruments : labX3500
  • Analysis is achieved under a flow of helium
  • Analog 4-20 mA outputs (Profibus communication also available) of the oxides contents
  • Waste ejection towards a dust extraction system and cell cleaning with compressed air


Performances :
 
  • High frequency analysis : up to 7 analyses / hour
  • Measurement accuracy (standard deviations):
      Ca : 0,1    Si : 0,15
      Al : 0,05    Fe : 0,03
  • Automated measurement cells (± 20) magazine for 1 week operation
  • Cell cleanliness optical checking system
  • 2 operating modes: Automatic - Manual
  • He consumption: 1,7 litre / min (during analysis)


Specifications :
 
  • Height : 2000 mm
  • Depth : 800 mm
  • Length : 2000 mm
  • Weight : 500 kg
  • Power supply : any from 380 to 600 V; 50-60 Hz
  • Compressed air supply : 6 bars, dry and clean
  • Location : - next to raw mill(s)
                    - in the laboratory

 

News

19th to 23rd April 2020, Las Vegas (Nevada), USA :

IEEE-IAS/PCA
Institute of Electrical and Electronics Engineers Cement Industry Technical Conference.
cementconf.org


 

3-6 May 2020, Vancouver (Canada) :

CIM Convention.

convention.cim.org


 

October 18-22, 2020, Cape Town (South Africa)

IMPC 2020(International Mineral Processing Congress).
impc2020.com